PLAYBACK43Recording to TVBasic RecordingBasic RecordingFollow the instructions below to record a TV program.1 Turn on the DVD Recorder+VCR and load arecordable disc or tape.Make sure your TV input is set to view the DVDRecorder+VCR.2 Set the desired Recording mode by pressing[REC MODE] repeatedly.DVD: HQ (High Quality - 1 hr/disc), SP (StandardPlay - 2 hrs/disc), EP (Extended Play - 4 hrs/disc),or SEP (Super Long Play - 8 hrs/disc).VCR: SP (Standard Play), LP (Long Play - 2 timesSP)3 If your DVD Recorder+VCR does not show aTV program, press [INPUT] on the remotecontrol. Use [PR+/–] to select the TV channelyou wish to record.4 Press [AUDIO] to select the audio channel torecord (Stereo, BIL, or Mono).The table below shows what audio channel will berecorded with different settings and different typesof broadcasts.The last column (Monitor Audio) shows what youwill hear during recording. For example, if the TVbroadcast is in Stereo, then setting the DVDRecorder+VCR to Stereo will record thebroadcast in Stereo, and the Monitor Audio willalso be in Stereo.5 Press [REC (l)] once.Recording will start. The REC indicator lights onthe front panel display.Recording continues until you press [STOP] or thedisc is full.To record for a fixed length of time, see OneTouch Record.6 Press [STOP (n)] to stop recording.Broadcast Audio MonitorL Ch R Ch AudioMONO MONO MONO MONO MONOSTEREO L R STEREOMONO MONO MONO MONOBIL I BIL I BIL I BIL IBIL II BIL II BIL II BIL IITVBroadcastSTEREOBILSelectedAudio• The maximum number of DVD titles per disc is49. If the DVD Recorder+VCR is powered offduring DVD recording, the recording will not besaved.• If a DVD+RW or unfinalised DVD+R disc isinserted in the tray, no title is playedautomatically after loading is finished.• If you are recording to a blank DVD+R (+RW)disc, it may take up to 7 minutes (it depends ondisc) for post processing after recording.RECORDINGOne Touch Recording allows you to add recordingtime in fixed increments at the touch of a button.1 Follow steps 1-4 under Recording from TV.2 Press [REC (l)] repeatedly to set the length ofthe recording.Recording starts after the first press. Eachsubsequent press increases the recording time by30 minutes (DVD) within the available space or30 minutes (VCR, to a maximum of 10 hours).The recording time is displayed on the front paneldisplay.One Touch Record (OTR)DF-H3512P-UL¿ 2008.1.25 5:21 PM ˘ ` 43 mac001 1200DPI 100LPI