Daewoo DFX-4505B User Manual
                                                          | |
Contents
| 
12ConnectionsChoose one of the following TV connections, depending on the capabilities of your equipment.RF ConnectionConnect the RF OUT (TO TV) jack on the DVD Recorder+VCR to the antenna in jack on your TV using the supplied75-ohm RF cable (R). If you use this connection, tune your TV to the DVD Recorder+VCR's RF output channel(CH52).Scart Connection1 Plug a scart cable into the scart socket EURO AV1 atthe back of the DVD Recorder+VCR and thecorresponding scart socket at the back of the TV set.(V)2 Plug a scart cable into the blue scart socket EUROAV2/DECODER at the back of the DVD Recorder+VCRand the corresponding scart socket at the back of asatellite decoder or set top box.S-Video Connection1 Connect the S-VIDEO OUT jack on the DVDRecorder+VCR to the S-Video in jack on your TV usingan S-Video cable (S).2 Connect the Left and Right AUDIO OUT jacks from the DVD Recorder+VCR to the left/right audio in jacks onyour TV using the supplied audio cables.Component Video Connection1 Connect the COMPONENT/PROGRESSIVE VIDEO OUT jacks on the DVD Recorder+VCR to the correspondinginput jacks on your TV using a Y Pb Pr cable (C) if the Component Video jacks (Y, Pb, Pr) are available onyour TV.2 Connect the Left and Right AUDIO OUT jacks from the DVD Recorder+VCR to the left/right audio in jacks onyour TV using the supplied audio cables.Progressive Scan Connection• If your television is a high-definition or ‘digital ready‘ television, you may take advantage of the DVDRecorder+VCR’s Progressive Scan output for the highest video resolution possible.• If your TV does not accept the Progressive Scan format, the picture will appear scrambled.1 Connect the COMPONENT/PROGRESSIVE VIDEO OUT jacks on the DVD Recorder+VCR to the correspondingin jacks on your TV using an optional Y Pb Pr cable (C).2 Connect the Left and Right AUDIO OUT jacks from the DVD Recorder+VCR to the left/right audio in jacks onyour TV using the supplied audio cables.Connecting a TV• Be sure to set the DVD Recorder+VCR to Progressive Scan mode by pressing and holding [P.SCAN] for 3 seconds(or changing the Video Output in the Setup Menu; see page 22).• Progressive Scan does not work with the RF, Audio/Video or S-Video connections.ANTENNAINPUTYPbPrCOMPONENT/PROGRESSIVE VIDEO INPUT S-VIDEOINPUTRVSCRear of DVD Recorder+VCRRear of TVDF-Q75D2D-HQ-I(GB) 2006.6.16 9:29 AM ˘ ` 12 mac001 1200DPI 90LPI |
Related manuals for Daewoo DFX-4505B
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine