SETUP25Initial SetupChange Password1 While ‘Preferences ‘ is selected, press [†] to select ‘ParentalCtrl‘.2 Press [√] to select ‘Password‘. Then press [ENTER].3 The ‘Input Password’ submenu appears. Enter your current 4-digitpassword then press [ENTER].4 Enter a new 4-digit password, then press [ENTER]. Re-enter the new password toconfirm, press [ENTER].• Master Password : If you forget your password, press 3,3,0,8 on the remotecontrol and then press [ENTER].• Set the new password to something other than '0000'.PreferencesChoose OK ExitENTER SETUPœ √ …†VideoAudioParental Ctrl ParentalAuto Settings • Password ChangeVCRModulator OutInput PasswordOld PasswordNew PasswordConfirm PWDInput digitsSelect OKOK CancelENTER0-9œ √ …†‘Auto Settings’ is not available for this set.This feature enables you to search for Index marks or specific times on yourVHS tapes.1 Press [SETUP]. The Setup menu appears.While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setuppage.2 Use [œ/√] to select ‘Preferences ‘.3 While ‘Preferences ‘ is selected, press [†] to select ‘VCR‘.4 Press [√]. The ‘VCR‘ submenu is displayed.5 Select ‘Index+’, ‘Index–’ or ‘Go to Zero’.If you select ‘Index+’ (or ‘Index–’) and press [ENTER], your DVDRecorder+VCR will locate your index mark and begin playback.If you select ‘Go-To Search’ and press [ENTER], your DVDRecorder+VCR will wind to the position 0:00:00 and stop.PreferencesVideoAudioParental CtrlAuto SettingsVCR • Index+Modulator Out Index-Go to ZeroChoose OK ExitENTER SETUPœ √ …†Preferences / VCR• The VCR menu is activated only when a video cassette tape is inserted.PreferencesVideoAudioParental CtrlAuto Settings•VCR Index+Modulator Out Index-Go to ZeroChoose OK ExitENTER SETUPœ √ …†DF-Q75D2D-HQ-I(GB) 2006.6.16 9:29 AM ˘ ` 25 mac001 1200DPI 90LPI