Daewoo DIM-44 User Manual
                         | |
Contents
| 
10Leveling the ice makerIt is important for the ice maker to be leveled in orderto work properly. Otherwise water will not flowproperly through the evaporator (ice mold). Theice production will be less than normal, and maybe noisy. The unit can be raised or lowered by rotatingthe plastic sheaths around each of the four rollingcasters on the bottom of the machine. If youfind that the surface is not level, rotate the castersuntil the ice maker becomes level. You may needto make several adjustments to level it. Werecommend using a carpenter’s level to checkthe machine.1. Place a carpenter’s level on top of the unit to see if the ice maker is level from front toback and side to side .2. Adjust the height of the casters as follows:Turn the leveling casters to the right to lower that side of the ice maker.Turn the leveling casters to the left to raise that side of the ice maker.You will find that the casters make it easy for one person to move the machine. This isuseful for cleaning and sanitizing the surface on which the ice maker is installed because itallows you to move the unit and have easy access to the surface to be cleaned.IMPORTANT: When the ice maker is ready to be installed in a cabinet or directly on thefloor, you must adjust the feet to level the ice maker and lock the rollers. If the floor islevel, just revolve the two front feet to touch the floor.Reversing the door swingTools needed: flathead screwdriver, Phillips screwdriverIMPORTANT: Before you begin, unplug the ice maker or disconnect power.To remove door from hinges:1. Remove the top hinge cover.2. Using a Phillips screwdriver, remove the screws, then remove the top hinge mat andtop hinge. Keep the parts together and set them aside.3. Lift the door off of the bottom hinge and set the door aside.To replace door on hinges:1. Using a flathead screwdriver, remove the plug buttons from the screw holes opposite thedoor hinges, top and bottom. Set aside.2. Remove the front louver. Set aside.3. Remove the bottom hinge and place it on the opposite side at the bottom of the door.downup |
Related manuals for Daewoo DIM-44
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine