3IMPORTANT SAFEGUARDSBefore the ice maker is used, it must be properly positioned and installed asdescribed in this manual, so read the manual carefully. We stronglyrecommends that you have a professional install your new machine. Thewarranty may be affected or voided by an incorrect installation. To reduce therisk of fire, electrical shock or injury when using the ice maker, follow basic precautions,including the following:• Plug into a grounded 3-prong outlet; do not remove grounding prong, do not use anadapter, and do not use an extension cord.• It is recommended that a separate circuit, serving only for your ice maker, be provided.Use receptacles that cannot be turned off by a switch or pull chain.• Do not connect or disconnect the electric plug when your hands are wet.• Never unplug the ice maker by pulling on the power cord .Always grip the plug firmlyand pull straight out from the outlet.• Never clean ice maker parts with flammable fluids. Do not store or use gasoline or otherflammable vapors and liquids in the vicinity of this or any other appliances. The fumescan create a fire hazard or explosion.• Before proceeding with cleaning and maintenance operations, make sure the power lineof the unit is disconnected and the water line is shut off.• Before operating, pull all panels back into place.• Never allow children to operate, play with or crawl inside the ice maker.• Do not touch the evaporator with your hand when the machine is operating.• Unplug the ice maker or disconnect power before cleaning or servicing. Failure to doso can result in electrical shock or death.• Do not attempt to repair or replace any part of your ice maker unless it is specificallyrecommended in this manual. All other servicing should be referred to a qualifiedtechnician.• Use two or more people to move and install ice maker. Failure to do so can result in backor other injury.• To ensure proper ventilation for your ice maker, the front of the unit must be completelyunobstructed. Choose a well-ventilated area with temperatures above 50°F (10°C) andbelow 100°F (38°C). This unit MUST be installed in an area protected from the elements,such as wind, rain, water spray or drips.• The ice maker should not be located next to ovens, grills or other sources of high heat.• The ice maker must be installed with all electrical and water connections in accordancewith state and local codes. A standard electrical supply (115 V AC, 60 Hz, 15 A),properly grounded in accordance with the National Electrical Code and local codes andordinances, is required.