Daewoo DLP-20J1 Instruction Manual

Also see for DLP-20D7: Service manual Service manual

Daewoo DLP-20J1 Instruction Manual Manual pdf 16 page image

16Daily UseSwitching On TV Set1) If stand-by indicator (B6)is red, then the TV set isin stand-by mode. Youcan switch on using theremote control POWERbutton (A1), the NUMBER0….9 buttons (A3), orPROGRAM UP (A6) /DOWN (A21) buttons. Thefront panel PROGRAM UP/DOWN buttons (B2) canalso be used.Once on, the stand-by in-dicator turns to green andthe picture appears on thescreen.2) If stand-by indicator (B6)is not lit, then the TV setis powered off. You mustpress the TV set front pan-el MAIN POWER button(B1). If a picture does notappear, then the stand-by indicator will be red. Inthis case, use the remotecontrol as indicated in 1).3) If stand-by indicator (B6)is flashing red, and greenthen the TV set is in child-lock mode.It is necessary to use theremote control POWERbutton (A1), NUMBER0….9 buttons (A3), orPROGRAM UP (A6) /DOWN (A21) buttons.The front panel PROGRAMUP/DOWN buttons (B2)will not function. Onceon, the stand-by indica-tor turns to green and thepicture appears on thescreen.Switching Off TV Set1) Pressing the remote control POWER button (A1), you can switch off to stand-by mode (lowpower consumption mode) which also allows quick restart by remote control (see above:SWITCHING ON TV SET).2) Pressing the TV set front panel MAIN POWER button (B1), you can completely power offthe TV set. In this case, you must use the same front panel POWER button (B1) to switch onagain (see above: SWITCHING ON TV SET).Remark: If a broadcast signal is not present after 10 minutes, the TV set will automaticallyturn to standby mode.