Daewoo DLP-20J1 Instruction Manual

Also see for DLP-20D7: Service manual Service manual

Daewoo DLP-20J1 Instruction Manual Manual pdf 25 page image

FEATURESCHILD LOCK OFFWAKE TIME OFFWAKE PROG. 01CLOCK - - : - -CLOCK PROG. 01ZOOM AUTO FULL SCREENLANGUAGE GBPosition ON/OFFPreviousLANGUAGEBG CZ D DK EF FIN GB GR HI N NL P PLRO RUS SPosition PositionPrevious Confirm25Features MenuSee section near the end of section DAILY USE for a more detailed explanation of these functions.(For operating instructions see page 20, HOW TO USE THE SUB-MENUS)1. When switched to ON:Prevents the use of the TV set with-out remote control1. Adjust this value ON or OFF.- In stand-by mode, the stand-byindicator flashes red and green toindicate the CHILD LOCK is set.- The front panel TV buttons (B2, B3,B4) become inactive and the TV willonly respond to the remote control.2. Wake up functionThis function is only selectablewhen the clock is set. The TV setturns on from stand-by at theWAKE TIME with the programmeentered on the WAKE PROG. line.Put the TV set on stand-by with theremote control.3. Shared with WAKE TIME.4. TV clock settingThis function allows user to enterthe time manually.Note : If you turn off the set withthe main power button, the clocksetting is lost. An automaticattempt is made to set the clockagain at power on.5. This function is only selectablewhen the default picture format iscurrently active (see also FORMATSELECTION, AUTO setting, page19). This selects the default formatto be used only when the formatselected with the ZOOM button(A15) is AUTO, and no pictureformat signalling data is received.6. LANGUAGE menu entry.2. Switch the WAKE UP function OFFor ’ON’ (the time will be showne.g. 07:15) with the remote controlCURSOR LEFT (A7) /RIGHT (A20)buttons- Enter the wake up time with theremote control 0...9 NUMBER(A3) buttons.3. Adjust TV turn-on program number.4. Adjust TV clock. Clock will startat 0 seconds upon entry of the4th figure.The prog. no. which can be usedto automatically seize the time atturn on can be entered here.5. Choose your preferred defaultformat with the remote controlCURSOR LEFT (A7) /RIGHT (A20)buttons.Note : For 4:3 TVs FULL SCREEN isrepresented by 4:3. For 16:9TVs FULL SCREEN is repre-sented by 16:9.6. The currently selected LANGUAGEis displayed. Press the OK button(A18) to access the menu andchange the selection.Language Menu- Select the preferred LANGUAGE by use of the CUR-SOR LEFT (A7), RIGHT (A20) buttons, and the CURSORUP (A6) or DOWN (A21) buttons.- Press the OK button (A18) to confirm the selection(the choice will be highlighted in red).Note: The languages shown are subject to modifica-tion without prior notice.GB