Daewoo DSI-9300 Instruction Manual

Also see for DSI-9100: Service manual

Contents

Daewoo DSI-9300 Instruction Manual Manual pdf 14 page image

➠ 25Video Recorder+Satellite Receiver➠ 24 Video Recorder+Satellite Receiver7 RECORDING CASSETTESTimer recording using EPGThe Digital satellite receiver provides an automatic system which makes it easier to set thetimer recording. EPG are shown in TV or Radio programme guides.1 Insert an appropriate tape and position it correctly,ready for recording. Press the [EPG] button and theEPG menu will appear.2 Press the [GREEN] button to show VCR recordTimer set.3 Press the [OK] or [RED] button to enter the EditEntry. The Channel, Date, Start and Stop time willthen be filled in for the programme you havechosen.4 If you wish to change any of the settings:• Move the select bar to the setting you want tochange using the […] or [†] buttons.• Change the setting using the [œ] or [√] buttons,orthe number buttons [0] to [9]. (For detaileddescriptions of all the settings and how they can be changed, please see the Normaltimer recording section.)5 When all the settings are correct, select the [OK]button. If you insert invalid data, you will seemessage box.6 The Timer List screen will then be shown with yournew timer highlighted.7 Press the [ ] button to put your video into standby.Your video will not record unless you do this. You can switch the video on again ifyou want to set the timer to record another programme. Remember to put yourvideo back into standby when you have finished setting the timer.• If the broadcasting station doen’t send the EPG data signal, there can be the channelwithout EPG data6 PLAYING CASSETTESVariable picture search1 Keep pressing [FF] to vary the forward search speed.2 Keep pressing [REW] to vary the rewind search speed.Pressing the above buttons will vary the search speed in two speeds.3 Press [PLAY] to switch back to normal playback.Variable slow motion1 Starting from playback you can keep pressing [SLOW-] or [SLOW+] to control slowmotion speed in six steps.2 Press [PLAY] to switch back to normal playback.Finding new recordings (index scan)The video index search system allows you to find the beginning of any recording you havemade on your video. Your video automatically records index marks on the tape whenever arecording is started.1 Press [INDEX +] or [INDEX –] to search forwards or backwards.The video will now wind to the beginning of a recording, play it for about 6seconds, then wind on to the next one.2 When you see the recording you want to watch, press [PLAY].CM skip (commercial skip)1 If you press [√√30] on the remote control during playback mode, tape advances for 30seconds segment.