Antennas with two sets of leadsYou might have two sets of leads from your antenna system, especially if you haveone antenna for VHF signals and one antenna for UHF signals.If your antenna system has both a coaxial lead and twin 300-ohm leads, youmust obtain a combiner (available at your local electronics store). Press or screw thecoaxial lead onto the combiner; place the twin leads underneath the screws on thecombiner and tighten the screws. Press the cable from combiner onto the antenna ter-minal on the back of your TV.If your antenna system has two sets of twin 300-ohm leads, you must obtain acombiner (available at your local electronics store). Place one set of twin leads under-neath the screws on the combiner and tighten the screws. Do the same with the otherset of twin leads. Press the cable from the combiner onto antenna terminal on theback of your TV.Connecting a cable systemIf your cable set-up is not described below, please contact your cable company formore information.If your cable system does not require theuse of a cable box, simply press or screw theincoming cable onto the antenna terminal onthe back your TV.9Chapter 2 : Connecting an Antenna or Cable to Your TV