Daewoo DTQ 25G1FC Instruction Manual

Contents

14Chapter 3 : Operating Your TVProgramming Your TV’s Channel MemoryYour TV automatically memorizes the channels you can receive. Once channels are memorized, youcan scan through them using WCHV buttons on the remote control or on the TV.SOURCE Selection1. Press menu button on the remote control oron the TV to display the main menu.2. Press WCHV buttons on the remote controlor on the TV to select ‘Auto Program’ andpress CVOLB buttons on the remote controlor on the TV.3. Press WCHV buttons on the remote controlor on the TV to select ‘Source’ and pressCVOLB buttons on the remote control or onthe TV. If you connected a antenna to yourTV, select ‘Air’, if you connected a cablesystem, select ‘CABLE’.Auto Programming Function1. Select Auto Program following step 2 and 3in “SOURCE selection” above.2. Press CVOLB button an the remote controlor on the TV to start auto programming pro-cess. The TV will automatically cyclethrough all the TV or CABLE channels onthe mode selected by the Air/Cable mode,and store active channels in the channelmemory3. Press MENU button on the remote control oron the TV repeatedly to exit on-screen menu when channel programming is completed. This pro-cess takes a few minutes.4. Even if you don’t press any button, the on-screen menu disappear after a few second.TAND-BY CH VOL MENUTAND-BY CH VOL MENUAND-BY CH VOL MENUAND-BY CH VOL MENUL Prev WVMove CBSelectSetupVideoAudioTimerFunction1L Prev WVSelect CBAdjustSetupEdit ProgramFavorite ChLanguageCaptionsPower RestoreInputAuto Program CB To Press2L Prev WVSelect CBAdjustAuto Prog.Auto ProgramSource Air3L Prev WVSelect CBAdjustAuto Prog.SourceAuto Program CB To Program2