Daewoo DTQ 25G1FC Instruction Manual

Contents

5If your cable system requires you to use a converter box for all channels, connect theincoming cable to the IN terminal on the converter box. Connect another cable between theOUT terminal on the converter box and the antenna terminal on the TV. You will need tokeep your TV tuned to channel 3 or 4 and change channels using the converter box.If your cable system only requires you to use a converter box for some channels (i. e.pay-TV channels), follow these steps: Find the primary incoming coaxial cable. Plug thiscable into a splitter (available at your local electronics store). Connect one coaxial cablebetween one OUT terminal on the splitter and the IN terminal on the converter box.Connect another coaxial cable between the other OUT terminal on the splitter and the B-INterminal on an A/B switch (available at your local electronics store.) Connect a third coaxialcable between the OUT terminal on the converter box and the A-IN terminal on the A/Bswitch. Finally, connect a coaxial cable between the OUT terminal on the A/B switch andthe antenna terminal on the back of your TV.When the A/B switch is in the A position, you need to change channels on the converterbox (and your TV should be tuned to channel 3 or 4); when the A/B switch is in the B posi-tion you can change channels on the TV.Chapter 1 : Connecting an Antenna/Cable and VCR to Your TV