6Antennas with two sets of leadsYou might have two sets of leads from your antenna system, especially if you have oneantenna for VHF signals and one antenna for UHF signals.If your antenna system has both a coaxial lead and twin 300-ohm leads, you mustobtain a combiner (available at your local electronics store). Press or screw the coaxial leadonto the combiner; place the twin leads underneath the screws on the combiner and tightenthe screws. Press the cable from combiner onto the antenna terminal on the back of yourTV.If your antenna system has two sets of twin 300-ohm leads, you must obtain a combiner(available at your local electronics store). Place one set of twin leads underneath the screwson the combiner and tighten the screws. Do the same with the other set of twin leads. Pressthe cable from the combiner onto antenna terminal on the back of your TV.Connecting a Cable SystemIf your cable set-up is not described below, please contact your cable company for moreinformation.If your cable system does not require the use ofa cable box, simply press or screw the incomingcable onto the antenna terminal on the back yourTV.Chapter 1 : Connecting an Antenna/Cable and VCR to Your TV