Daewoo DTQ 27S2FC Instruction Manual

Daewoo DTQ 27S2FC Instruction Manual Manual pdf 12 page image

Chapter 3 : Operating Your TVOperating Your TVC H A P T E R 310Once you have connected your TV to an antenna or cable system, plugged the TV in,and put batteries in the remote, you are ready to use the TV. The first thing you shoulddo is program your TV so it memorizes all of the available channels.Turning Your TV On1 To turn your TV on, press the POWER button on the remotecontrol. You can also use the POWER button on the front panel.Make sure your TV is plugged in before you try to turn it on.Programming Your TV's Channel MemoryYour TV's memory determines the channels that are available using the VCHWbuttons. If a channel is not in memory, you can tune to it with the number buttons, butnot with the VCHW buttons. Follow these steps to program your TV's memory:1 With the TV on, press the MENU button.2 Use the VCHW buttons to select SETUP and press CVOLB.3 Use the VCHW buttons to select ANTENNA, then use the CVOLB buttons toselect AIR or CABLE. If you connected an antenna to your TV, select AIR; if youconnected a cable system, select CABLE.4 Use the VCHW buttons to select AUTO PROGRAM, then use the CVOLB buttonsto begin the AUTO PROGRAM process. This process takes a few minutes.5 Press the MENU button to return to normal TV viewing.Your TV's channel memory will not be affected by a power outage. You will not need tore-program the memory unless you change the type of cable antenna connected to yourTV.2 3 411