Daewoo DV6T834NP Owner's Manual

Also see for DV6T834NP: Owner's manual

53THE OTHERS52DVD Audio output standardsSpecificationsPower AC 120V, 60HzConsumed electricity 24W (supplementary 4W)Weight 4.5kgDimension (WxHxD) 435mm x 93mm x 255mmOperative temperature +5°C~35°CInstallation condition Horizontal / Relative humidity under 80%Received channels VHF: 2-13 CH / UHF: 14-69 CH / Cable: 1-125Signal type NTSC COLORAntenna Input/output U/V-mixed: 75Ω unbalancedVIDEO input 1.0 Vp-p unbalanced, RCA JACKAUDIO input -8.8dBm, RCA JACKVHF output 3 or 4 CHVIDEO output (common use of DVD and VCR) VIDEO output terminal, 1.0 Vp-p unbalanced, RCA JACKVIDEO output (DVD only) S-VIDEO output (75Ω In load Y: 1.0Vp-p, C:0.286Vp-p)COMPONENT output (75Ω In load Y: 1.0Vp-p, Pb:0.7Vp-p, Pr:0.7Vp-p)AUDIO output (common use of DVD and VCR) Audio output terminal (2 kinds): -8.8dBm(VCR), 2.0Vrms(DVD), RCA JACKAUDIO output (DVD only) Analogue AUDIO output (2 CH): 2.0VrmsDigital audio output (COAXIAL)Playable tape Very high dense tapes with VHS marksPlayable disc DVD, VIDEO-CD, CD (12mm), CD (8mm), MP3, CD-R, CD-RWTape speed SP: 33.35mm/s, SLP: 11.12mm/sPlaytime SP: 2hrs, SLP: 6hrs (use of T-120 tape)Clock display 12 hrs AM/PMTime Recording 8 programs a yearVIDEO S/N (VCR) Over 45dB(Standard recording)Resolution VCR Over 220 lines (Standard recording)DVD Over 500 lines (DVD Disc PLAY)AUDIO (VCR) Over 69dB (Hi-Fi), over 40dB (Mono)AUDIO (DVD) 90dBAUDIO dynamic range 90dBDisc typeDVD VIDEO-CD CDAnalogue Audio output 48/96KHz sampling 44.1KHz sampling 44.1KHz samplingDigital Audio output 48KHz sampling 44.1KHz sampling 44.1KHz samplingOutputBefore doubting about troubles (VCR)• Recording a TV program is impossible.• Once pressing [REC], a videotape isejected automatically.• Timer recording of Cable TV does notwork.• In spite of pressing [CHANNEL], achannel can not be set.• While duplicating, screen is not cleanand distorted.• remote control does not work.• Buttons on remote control do notwork.• VISS index search does not work.• Cable broadcasting can not beselected.ChecksSymptomä Please check whether a channel is fixed on video. If not, you have toturn it into “TV” by pressing [OUTPUT] button.ä Please check whether the timer recording info is right.ä Are RF cables inputted antenna connection terminal correctly?ä Does a CH number selected in display section appear?ä Please check a tab on a tape whether it is broken or not. (If it wasbroken, please scotch-tape it)ä Check whether the screen is displayed in VCR Only Channel. Press[OUTPUT] button in this remote controller to adjust in "GeneralBroadcast" condition.ä Is the rounded line (RF cable) connected in "ANT.IN" terminal?ä Please check whether the clock is right.ä Does the display on your video show “ ” (Ready to timer recording)?Please make it out.ä Please check whether the timer recording info is right.ä Please check a tab on a tape whether it is broke or not. (If it wasbroken, please scotch-tape it)ä Was a cable data output code connected correctly?ä Were a converter manufacturer setup and output channel right?ä Did you enter a password? (Please cancel it.)ä Did you turn off your player? (Please turn it on.)ä You may not memorize channels.ä Please check your channel setting or press a number button.ä Some tapes or discs distributed in the market for lending is set toprevent copy in manufacturing. These tapes cannot be duplicated ina good condition.ä Battery may be weak or exhausted.ä A receiver of remote control may be different with a sender.ä In case a videotape is positioned in the beginning, “VISS REW” and“REW” do not work.ä In case a videotape is positioned in the end, “FF”, “VISS FF”, “PLAY”and “REC” do not work.ä Please check whether another button is pressed.ä Are you playing a tape that is not recorded in this recorder? (Try torecord it with the recorder.)ä You may start recording it in “REC-PAUSE”. Please start recording itfrom stop condition.ä Please select “CABLE” not “NETWORK” from the “CHANNEL SETTING”.

/ 28

Related manuals for Daewoo DV6T834NP