|
13INSTALLATION12Connecting with Cable BoxHow to connectINPUT 1INOUT ANT ININPUT 2OUTOUTINIf your cable system only requiresyou to use a converter box forsome channels(i.e., pay-TV channels), follow thesesteps: Find the primary incoming RFcable. Plug this cable into a splitter(available at your local electronicsstore.) Connect one RF cablebetween one OUT terminal on then You should install a distributor additionally.How to watch general broadcasting with recording CATV11 Set Channel Select switch of Converter Box to CH 3 or 4 as same as video exclusive channel. Press [SET]button in [VCR] operation to set video exclusive channel in “CHANNEL SET” screen.22 Press channel button of Converter Box to select channel to be recorded. In this case, if you want to watchCATV to be recorded, press [TV/INPUT] button of TV to select “Out (VCR)”.33 Press [REC] button in DVD-Video.44 To watch general broadcasting, press channel button in TV to select the desired channel.splitter and the IN terminal on the converter box.Connect another RF cable between the other OUT terminal on the splitter and the A-IN terminal on an A/Bswitch (available at your local electronics store.) Connect a third RF cable between the OUT terminal on theconverter box and the B-IN terminal on the A/B switch.Connect a RF cable between the OUT terminal on the A/B switch and the ANT. IN on your DVD-VIDEO.When the A/B switch is in the B position, use the converter box to change channels ; when the A/B switch is inthe A position, use the DVD-VIDEO to change channels.• For some types of TV, you should press [TV/INPUT] button in TV remote control and convert from Out 1( VCR 1) orOut 2(VCR 2) mode to Broadcasting Channel mode to change TV channel.• Change channel selection of CATV receiver in recording, contents of recording is changed. RF Cable AUDIO/VIDEO CableRF CableRF CableRF CableConnecting with Other Video EquipmentHow to ConnectAUDIOVIDEOANT INPUTA/V OUTPUTCAUTIONCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PRESONNEL.RISK OF ELECTRIC SHOCKDO NOT OPEN20 18 16 14 12 10 8 6 4 321 19 17 15 13 11 9 7 5 3 1How to Copy(Edit) Tape with Other Video Equipment11 Connect Audio/Video Out jack in other video equipment to Audio/Video In jack in rear panel (or frontpanel) of DVD-Video with connecting cable.22 Connect “ANT. IN” jack in TV to “RF.OUT” jack in DVD-Video with RF cable.33 To record contents of other video equipment with DVD-Video, insert recording tape attached recording tabin DVD-Video.11 Turn on DVD-Video.22 Press [OUTPUT] button of remote control and adjust DVD-Video to display “External Input 1” or “ExternalInput 2” in TV screen.33 Press [PLAY] button in other video equipment.44 Press [REC] button in DVD-Video if you want to record contents of other video equipment.55 Press [Pause] button in DVD-Video when unnecessary or undesired scene is displayed in recording.(Caution) Recording is released automatically after 5 minutes since pressing [PAUSE] button. Press [REC]button if you want to record again.Playback VCR,Camcorder,SatelliteReceiver .........RF CableAUDIO/VIDEO Cablen You can connect a wide variety of audio/video equipment to your DVD-Video, including : an additional VCR,Laser Disc Player, DVD Player, Camcorder, Satellite Receiver, Video Game. Since all of these devices useessentially the same connections, they will be described together. PreviousNext |