Daewoo DVK-87N User Manual

Daewoo DVK-87N User Manual Manual pdf 18 page image

30Daewoo Video Cassette Recorder User’s Guide29 Daewoo Video Cassette Recorder User’s Guide2 Press 4 to choose Functions.3 Press 4 to display Go-To Search.4 The tape counter is displayed on the screen. Inputthe tape counter you want to go and press REW orFF, the VCR will search for the time counter youwant.Marking a tape for zero search1 Use PLAY, REW,or FF to reach the point on the tapethat you would like to mark as 0:00:00.2 Press DISPLAY to display the tape counter on thescreen.3 Press CLEAR to reset the tape counnter to 0:00:00.4 You can continue to play the tape or perform otherfunctions with the VCR.Child LockTo disable to usage of the VCR, or to protect your timerrecordings, you can lock the VCR so that the buttonson the VCR or remote won’t work.- To lock : Press and hold POWER on the remote forapproximately six seconds.- To release : Press and hold POWER on the remotefor approximately six seconds.Using advanced features,continuedGO-TO SEARCHCurrent tape counter is2:17:28Press REW or FFto go to - : - -: 00MENU ExitFUNCTIONS1 Auto Play: ON2 Auto TV/VCR: ON3 Index Search4 Go-To SearchMENU ExitINDEX SEARCHPress REW or FFto begin searchingorEnter a specificindex number- -MENU Exit- Select OFF if you want the VCR to remain in the TVmode. This is useful if you watch your VCR on theTV’s video input and you don’t want yourantenna/cable signal interrupted by the VCR.Searching a cassette tape for programs (indexing)When you record a programs, the VCR places an indexmark at the start of the recording. To search for an indexmark:1 Press MENU to display the menu.2 Press 4 to choose Functions.3 Press 3 to choose Index Search.4 If you want to search through a certain number ofindex marks, press two number buttons to enter thenumber of marks you want to search. Press CLEARon the remote to correct an entry.5 Press REW to search backward or FF to searchforward. The VCR will locate your index mark andbegin playback. If you did not enter a specific indexnumber, the VCR will locate the next index mark andbegin playback. Press STOP to stop index searching.Searching with the tape counter (go- to search)You can mark a segment of the video cassette with thetape counter that will help you easily locate the segmentlater.1 Press MENU to display the menu.FUNCTIONS1 Auto Play: ON2 Auto TV/VCR: ON3 Index Search4 Go-To SearchMENU ExitINDEX SEARCHPress REW or FFto begin searchingorEnter a specificindex number- -MENU Exit!• If two recordings overlap, theindex mark for the secondprogram will be erased.Therefore, when you use theindex feature to find the secondprogram, the VCR will skip overit.• If you record multiple programsin one recording session, theVCR will only find the index markthat was placed on the videocassette tape when the recordingsession began.! Some index marks that maybe missed by the VCR :• A mark too close to yourlocation on the tape.• The mark at the beginning of arecorded segment of five minutesor less.• The first index mark on the tapewhen you start at the beginningof the tape.Using advanced features,continued