Daewoo DVQ 14H1FC Instruction Manual

Daewoo DVQ 14H1FC Instruction Manual Manual pdf 29 page image

24 Chapter 5 : Using Timer FunctionsC H A P T E R 5Using Timer FunctionsYour TV/VCR has a built in-clock, and you can set the TV to turn on and off at times that youselect. You can also set your TV to turn off after counting down a certain amount of time.Setting the Clock AutomaticallyYour TV/VCR can automatically set its internal clock using a signal from a local PBS station.If you complete the following procedure, and your local PBS station is sending a time signal,then your TV/VCR will always show the correct time.1. With the TV turned on, press the MENU button until “Time” menu is displayed.2. The “Set Clock” item will be selected. Press the VOLB button twice, then “Auto” will bedisplayed in RED.3. Press the xCHy buttons to display the “Auto Current Time Set” mode.4. Use the xCHy buttons to set the PBS channel. If you don’t know the channel of the localPBS station, to set “Automatic”5. Use the VOLB button to select “Time Zone”.6. Press the xCHy buttons to select that corresponds to the time zone where you live. If youdon’t know the time zone where you live, to set ‘Automatic”.Press the xCHy buttons to change the Time Zone.Automatic Atlantic Eastern Central Mountain PacificAlaska Hawaii Automatic7. Use the VOLB button to select ‘DST” (Daylight Savings Time).8. Press the xCHy buttons to select DST “Automatic” “ON” “OFF”. (See the table blow)9. Press the L MENU button to exit.10. To activate the Automatic Clock setting, press the POWER button to turn off your TV/VCR.Leave the TV/VCR off for 4-5 minutes. When you turn the TV/VCR back on, the automat-ic clock should be set.Choose ToAutomatic Select to set the daylight savings time automaticallyON Select if your area uses daylight savings timeOFF Select if your area does not use daylight savings time