3INSTALLATION INSTRUCTIONS• LOCATION OF INSTALLATION1. Install the unit at a place having sufficient strength to support the unit securely.2. Do not install the unit at a place where leakage of combustible gas is suspected.3. If the air conditioner is operated in an atmosphere containing oils (including machine oil), salt near acoastal area, etc, such substances may lead to failure of the unit.4. Provide sufficient clearance or space around the air inlet and air outlet so that air flow will not beobstructed (See following figures).• BEFORE INSTALLATIONTest Run Unit : Plug unit into proper power supply outlet.Refer to operating instructions in this manual for comfortable living. Check all controls for correctoperation, then unplug unit.Determine Correct Mounting procedure-Refer to Window Installation or Through the Wall Installation.WARNING :• Moving parts can cause personal injury. Be careful when test-running unit. Do not operateunit with front grille removed .• Be sure to use an exclusive power source.• Contact service man for replacement of power cord.