Daewoo DWD-F1011 Instruction Manual

Also see for DWD-1012: Instruction manual

Contents

Daewoo DWD-F1011 Instruction Manual Manual pdf 5 page image

5In using only one water tap or in case of only one water inlet valve, connect the inlet hose to thecold water inlet valve.Option : Be careful not to confuse hot water inlet and cold water inlet.For Ordinary TapFor Screw-Shaped TapINLET HOSE CONNECTION1 Pull down the collar of theinlet hose to separate itfrom the water tapadapter.2 Loosen the four screwsproperly in order to fit intowater tap.3 Fit the water tap adapterinto the water tap andtighten the four screwsevenly while pushing upthe adapter so that therubber packing can stickto the water tap tightly.4 Remove the tape, andscrew connector B intoconnect A tightly.5 Connect the inlet hose tothe water tap adapter bypulling down the collar ofthe hose end.6 Connect the inlet hoseadapter of the hose to thewater inlet of the washerby turning it clockwise tobe fixed tightly.• Please check the rubberpacking present inside the inlethose adapter of the hose.1 Connect the inlet hose tothe water tap by screwingthe connector tightly.2 Connect the connector-inlet supplied if necessary.3Connect the inlet hoseadapter to the water inletof a washer and turn it tobe fixed.*Check the packing in the inletTAPEConnector BConnector AConnectorConnectorRubberPackingHoseConnector RubberPackingHoseConnectorinletConnectorDownloaded From WashingMachine-Manual.com Manuals