Daewoo DWD-F1011 Instruction Manual

Also see for DWD-1012: Instruction manual

Contents

Daewoo DWD-F1011 Instruction Manual Manual pdf 9 page image

9Press this switch to turn the power on or off.Operation and temporary stop is repeated as it is pressed.When you want to change program in operating;press the “Start/Hold” button Select the program that you want to change press the“Start/Hold” button again.You can select the course you want, and each lamp is turned on when that course is selected.For the more detailed information, please refer to the page 11~18.It can be used to adjust temperature of water according to types of the load to be washed.As the button is pressed, temperature of water is selected byCold 30˚C 40˚C 60˚C 95˚CBy pressing the spin button, the spin speed can be chosen.Rinse Hold • Is selected by pressing the spin button repeatedly. This function leaves clothesin the machine; suspended in the water after a rinse without entering into spin.• To proceed through to a drain or spin, after the Rinse Hold function iscompleted, use spin button.No spin • If no spin is selected, the washer stops after draining water.Crease Care • If you want to prevent crease, select this button with spin speed.Rinse+ • Is used to add a rinse, which may assist in removing traces of detergent residue.• By selecting Rinse+ function, the rinse time and the rinse water are increased.Pre-Wash • The washer operates one additional wash and spin before the main wash.• If the laundry is heavily soiled, Pre-Wash course is effective.• Pre-Wash is available in Cotton and Synthetic programs.All courses have pre-set washing times, but Time Save decreases it to 10 minutes.Each time this button is pressed the watch icon is repeated on and off. When it is on, the TimeSave function is set. Time Save is available in Cotton, Eco and Synthetic programs.It can be used to pre-engage time for wash.Use this function when you want to protect any accident occurring from handling of washer by a child.During an operation of washer, press ‘Time Save’ and ‘Time Delay’ buttons simultaneously.In Child Lock mode, no button functions except Power button.In Child Lock mode, press ‘Time Save’ and ‘Time Delay’ buttons simultaneously like setting ChildLock and Child Lock is cancelled.To change to the desirde program, while in Child Lock mode;1. Press both the Time save and Time delay buttons together once again.2. Press the Start/Hold button.3. Select the desired program and press the Start/Pause button again.THE FUNCTIONS OF THE CONTROL PANELDWD-F1011WD-F1011WASHING MAASHING MACHINECHINE* The child lock can be set at any time and it is automatically cancelled when operational errorsoccur. Also Child Lock works also when power is off.Changethe desiredprogramDownloaded From WashingMachine-Manual.com Manuals