12Setting up your player(Option 1) - Connecting your player through RF leadWith this connection, if your player is receiving CH BBC1 and your TV is displaying CH3, when you press the[TV/VCR] button on the remote control, your TV will automatically display the CH BBC1. “VCR” will beshown in the display.In this mode, to change the viewing channels the [PR-] and [PR+] buttons on the player remote need to be used.To switch off this mode press [TV/VCR] on the remote control, TV remote can now be used as normal. You willget better pictures and sound quality if you connect your player using a scart lead. Before you start, unplug all the equipment from the mains supply.TelevisionAerialThe type of aerial youshould use, depends onlocal interference and howfar you are from thetransmitter. You shouldcontact a local retailer if youhave any questions aboutyour aerial.Back view of your player230V~,50/60 Hz(Option 2) - Connecting your player through a scart leadTelevisionAerialBack view of your player230V~,50/60 HzScart lead (supplied onlySD-9500P&SD-9800P )