Connections172nd scart socket2nd scart socketIf your video has a 2nd scart socket, as shown in the diagram below, you can connect other equipment as seenon pages 13-15.When connecting other equipment please refer to their manuals for further information. This video manualrecommends the set up as shown on page 13. When connected by this method if the equipment is turned off thevideo behaves as normal, but if the equipment is turned on the video will automatically switch over to AV2mode and displays the channel of the other equipment, channel selection can only be performed by the otherequipment, the video PR+/PR- buttons have no effect.To return to normal video use the other equipment must be turned off.Recording from other Equipment.Simple recording can be performed, ensure the equipment is turned on and is displaying the correct channel.Timer recording, set the video to perform a timed recording ensuring AV1 is selected as the channel to berecorded. Some equipment may have a timer which allows it to be powered on to the correct channel, if thisfeature is not available the other equipment should be left powered on.Front AVIf the VCR/DVD player has front input sockets, it is possible to connectdevices such as a camcorder to the video. To watch a camcorder tape thevideo must be in AVF mode. Recordings of this input are the same asdescribed on pages 12-15.2nd scart INPUT ONLYINPUT+OUTPUT