Installation13How to connectHow to connect your player to another player Before you start, unplug all the equipment from the mains supply.First playerSecond player230V~,50 Hz1) Insert the tape you wish to record on into the first player and press [OUTPUT] until “AV1” appears on thefront display.2) Insert the tape you wish to copy from into the second player. Press the [PLAY] button on the second player.3) Press the [RECORD] button on the first player.The player will start recording.If your player has two scart sockets, you can use the other socket “AV2” to connect other equipment.To use this function, see page 15.How to connect your player to a camcorderHow to connect Before you start, unplug all the equipment from the mains supply.If you have connected your camcorder in this way, you can also connect a scart lead from “AV2” on theback panel of the player to the television. To use this function, see page 15.You can also connect the camcorder by using a phono cable if your player has front input sockets.Check the front of your player for this connection, see page 15.CamcorderAerial230V~,50 HzTelevisionPlayertocamcorderScart Plugto TVDV6T712D-AQ/I(GB) 02.11.12 5:39 PM ˘ ` 13 mac001 300DPI 120LPI