VCR Operation23Tuning in New StationsTuning The TV and player are switched on. To see the picture from your player, press the station button on the TV reserved for player input orthe AV (Audio / Video) button. "AV1/2" should not be selected with the AV button on the player.To complete the set-up of your video recorder when theauto set has not stored all of the channels or when you wishto store a new channel.Call the video’s "MAIN SETUP", choose "PR PRESET".1Select "MANUAL SET".2Choose any unused location number "----" or "P-xx" ...It's simplest to use the same location number on both theTV and video.... and confirm.3Set the station you want:• the programme location number;• the broadcast system you want (Aerial(CH) orCable(CC)),• You can directly enter the real channel number with the[0 to 9] buttons, or search by pressing [< / >],• The fine tuning you can adjust,• When the program is encoded (and you have a decoderconnected to socket EURO AV2), press the [< or >] toselect ON or OFF.• Change or create the station name.4Once you see the station you want, store it.Tune in further stations (from step 3 onwards) or exittuning mode.5PR PRESETAUTO SETMANUAL SETPR ERASEPR ALIGNPR+/-:SELECTOK:CONFIRM SETUP:ENDMANUAL SETPR+/-: UP/DOWN> : SELECTOK:CONFIRM SETUP:ENDMANUAL SETPR01 ARD PR08 P-08PR02 ZDF PR09 P-09PR03 P-03 PR10 P-10PR04 P-04 PR11 P-11PR05 MTV PR12 ----PR06 P-06 PR13 ----PR07 P-07 PR14 ----PR+/-:SELECTOK:CONFIRM SETUP:ENDPR 04RECEPTION AERIALAUTOSEARCH CH _ _FINE TUNINGDECODER ONNAME _ _ _ _MANUAL SETPR+/-: UP/DOWN> : SELECTOK:CONFIRM SETUP:ENDPR 03RECEPTION AERIALAUTOSEARCH CH 03FINE TUNINGDECODER ONNAME _ _ _ _MANUAL SETPR+/-: UP/DOWN0/1: CHANGE/CREATEOK:CONFIRM SETUP:ENDPR 03RECEPTION AERIALAUTOSEARCH CH _ _FINE TUNINGDECODER ONNAME _ _ _ _DV6T712D-AQ/I(GB) 02.11.12 5:39 PM ˘ ` 23 mac001 300DPI 120LPI