52Before suspecting a fault (VCR)• “Power On” does not work.• It does not work even in “Power On”.• A videotape is not inputted in.• On inputting a videotape, the tape isre-ejected.• A videotape is not ejected.• A channel on video and a play screendoes not appear.• Noise (screen noise) appears onscreen.• Noise appears on screen afterrecording.• During playback, noise appears.• Sound and picture are poor.• Sound comes out but picture does notappear.• Picture is irregular and stripes appears.• "Picture Error" message is displayedon the screen.• While recording and playing, the topof screen waves.• The picture is not clear.• A picture at pause is trembling orslow screen is not clear.ChecksSymptom➤ Please check whether the power plug is inserted in an electric outlet.➤ Please check whether a videotape is inserted in.➤ Try to insert the plug again.➤ Please check whether a power plug is inserted in an electric outlet.➤ Please check whether a videotape is in.➤ Please check whether a videotape is inserted in a right direction (Ifthe machine won’t allow you to insert a tape, the side of transparentwindow should be on the upside)➤ Have you inputted a videotape again just after the tape was ejected?Please try it again after fully ejecting it.➤ It may not be in squarely. For correct operation you must insert the tape smoothly.➤ That’s why a safe mode to protect a videotape is operatedautomatically. Please pull out the tape and input it again.➤ In case the product is not used for a long time, a videotape may not beejected because the film inside may be stretched. In this case, please pullout a power plug for about 10mins and then press the “EJECT” button.➤ Please check your antenna’s connection.➤ TV channel should be stored on video channel.➤ Please check your antenna’s signal whether it may be weak. If it is weak,please use an (RF) radio frequency amplifier connected with the device.➤ Press “TV/VCR” and then ensure “VCR” is displayed on the display panel.➤ Check if VCR, was it turned on?➤ While in recording a program, do you watch another channel?➤ Select TV by pressing [TV/VCR] button on remote control.➤ While in playing a videotape, there may be some noise or blot in thepart of the beginning of a videotape or resuming “PAUSE”. This isnot a fault.➤ Please press “TRACKING” for better screen. Videotape may bepoor. Try to change it to another one.➤ Please use a head-cleaner to clean VCR heads. VCR heads may becontaminated.➤ Since VCR Play signals are not stable like a TV signals, screen maybe unstable or curved while playing. This normally occurs on olderTV’s which may have a specific channel for VCR playback.➤ If videotape is the one recorded by other products or old one, stripemay appear on the screen.➤ Try to adjust the picture by [TRACKING+/-] button➤ Try to use a head-cleaner.➤ Try to use a head-cleaner.➤ Try to adjust the screen by [TRACKING+/-] button.Downloaded From Disc-Player.com Daewoo Manuals