HDCVI Series DVR User’s Manual127Figure 4-484.10 SettingIt is for you to set camera, network, event, storage, system and etc.4.10.1 CameraHere you can set audio/video property, camera property and channel name, channel type.4.10.1.1 Remote Device (For digital channel only)NoteYou can see this interface after you set IP channel in chapter 4.10.1.3.5. System supports ONVIFstandard protocol.4.10.1.1.1 Remote DeviceIn the main menu, from Camera ->Remote, you can go to an interface shown as in Figure 4-49. Hereyou can add/delete remote device and view its corresponding information. IP search: Click it to search IP address. It includes device IP address, port, device name,manufacturer, type. Use your mouse to click the item name, you can refresh display order. Click IPaddress, system displays IP address from small to large. Click IP address again, you can see icon,system displays IP address from large to small. You can click other items to view informationconveniently. Add: Click it to connect to the selected device and add it to the Added device list. Support Batch add.You can see the corresponding dialogue box if all digital-channel has connected to the front-end.System can not add new device if the device you want to add has the same IP and TCP port asthe device in the list. Show filter: You can use it to display the specified devices from the added device. Edit: Click button or double click a device in the list, you can change channel setup. Delete: Please select one device in the Added device list and then click to remove. Status: means connection is OK and means connection failed.
