HDCVI Series DVR User’s Manual176Figure 4-1174.10.5 System4.10.5.1 General4.10.5.1.1 DeviceGeneral setting includes the following items. See Figure 4-118. Device ID: Please input a corresponding device name here. Device No: Here you can set device number. Language: System supports various languages: Chinese (simplified), Chinese (Traditional), English,Italian, Japanese, French, Spanish (All languages listed here are optional. Slight difference maybefound in various series.) Video standard: There are two formats: NTSC and PAL. Vodeo mode: It is to set max decode mode of the analog signal. There are two options: 960H/D1.Please note this item is only valid when all channels are analog modes only. HDD full: Here is for you to select working mode when hard disk is full. There are two options: stoprecording or rewrite. If current working HDD is overwritten or the current HDD is full while the nextHDD is no empty, then system stops recording, If the current HDD is full and then next HDD is notempty, then system overwrites the previous files. Pack duration: Here is for you to specify record duration. The value ranges from 1 to 120 minutes.Default value is 60 minutes. Real-time playback: It is to set playback time you can view in the preview interface. The valueranges from 5 to 60 minutes. Auto logout: Here is for you to set auto logout interval once login user remains inactive for aspecified time. Value ranges from 0 to 60 minutes. Navigation bar: Check the box here, system displays the navigation bar on the interface.
