Dahua N6 2U Series Quick Start Manual

Dahua N6 2U Series Quick Start Manual Manual pdf 36 page image

32z Zoomz Focusz IrisClick icon and to adjust zoom, focus and iris.Figure 2-30In Figure 2-30, please click direction arrows (See Figure 2-31) to adjust PTZ position. There aretotal 8 direction arrows. Please note if you use remote control, you can use just four directions(Up/down/left/right).The speed value ranges from 1 to 8.Figure 2-312.8.3 3D Intelligent Positioning KeyIn the middle of the eight direction arrows, there is a 3D intelligent positioning key. See Figure2-32. Please note, this function needs protocol supported and can only be operated by mouse.Click this key, system goes back to the single screen mode. Drag the mouse in the screen toadjust section size. It can realize PTZ automatically.Figure 2-32Here is a sheet for you reference.Name Functionkeyfunction ShortcutkeyFunctionkeyfunction ShortcutKeyZoom Near ► Far Focus Near _ Far ►Iris close W Open fYou can click set button in Figure 2-30 (or click REC button in the front panel) to set preset, tour,and pattern.You can click page switch button in Figure 2-30 (or click Fn button in the front panel) to call mainfunction.