Local Configurations 83Parameter DescriptionMirror Enable the function, the left and right side of the video image will beswitched. It is disabled by default.3D DenoiseThis function specially applies to the image which frame rate isconfigured as 2 at least. It reduces the noises by making use of theinformation between two frames. The bigger the value is, the betterthe effect.Flip In the Flip list, you can select 180°to change the video image display.By default, the setting is No Flip.Light In the Light list, select Close or Enable to use the backlightcompensation or not.Scene ModeConfigure the white balance to adjust the general hue of the image.The default setting is Auto.Auto: Automatically apply white balance to different colors tomake the image color display normally.Sunny: Apply the threshold value to sunny environment.Night: Apply the threshold value to night.Customized: Manually adjust the Red Gain and Blue Gain values.Day & NightConfigure the color and black&white mode of the image. This settingis not affected by the configuration files. The default setting is Auto.Color: The camera outputs color image only.Auto: Depends on the camera, such as overall brightness andwhether there is an IR light, either color image or black&whiteimage is output.B/W: The camera outputs Black and white image only.By Time: The camera outputs image according to the configurethe sunrise time and sunset time.Click Apply to complete the settings.5.5.2 Configuring Encode SettingsSelect Main Menu > CAMERA > ENCODE > Encode.The Encode interface is displayed. See Figure 5-61.
