Daikin BRC1D517 Operation Manual

Also see for BRC1D517: Installation manual

Contents

Daikin BRC1D517 Operation Manual Manual pdf 13 page image

BRC1D517Remote controller4PW15196-1AOperation manual10Programmed actions might overlap; due to the "lastcommand overrules" logic, the last scheduledcommand will rule.How do I interpret the readings on thedisplay when the schedule timer isactiveAs described above, the schedule timer settings, (andas a consequence the display readings) might beoverruled temporarily by a manual intervention.If you want to be absolutely sure about the scheduletimer settings for this very moment, you must browsethe schedule timer programmed actions. Refer to"Browsing the programmed actions in the scheduletimer" on page 8.6. Programming the schedule timerWhat do I have to program?As the schedule timer is based on a week program(the same actions will be repeated every week) youwill have to select the day of the week first.Now you must choose an action:Finally you must enter the time of the day when theaction must be enabled.Getting startedProgramming the schedule timer is flexible (you canadd, remove or alter programmed actions wheneverrequired) and straightforward (programming steps arelimited to a minimum).Below are some tips and tricks to ensure successfulprogramming of the schedule timer:• familiarise yourself with the icons and thebuttons, you will need them whenprogramming,• familiarise yourself with the browse function,you will need it to start programming. Refer to"Browsing the programmed actions in theschedule timer" on page 8,• fill out the form at the end of this manual; notethe time and the required action for each day(keep in mind that the number of actions islimited to 5 per day),• take your time to enter all data accurately,• try to program the actions for each day inlogical sequence (start with action 1 for thefirst action and end with the highest number forthe last action). This is not a requirement but itwill make it much easier to interpret theprogram later,• keep in mind that you can always alter, add orremove the programmed actions later.1 switch on the installation at a scheduled time, incombination with a setpoint (exact temperaturecontrol)2 switch off the installation (end of control)3 switch on the installation at a scheduled time, inlimit operationNOTE If you program 2 or more actions on thesame day and at the same time of theday, only the action with the highestaction number (2 - 5) will be executed.