Daikin BRC1D517 Operation Manual

Also see for BRC1D517: Installation manual

Contents

Daikin BRC1D517 Operation Manual Manual pdf 16 page image

Operation manual13BRC1D517Remote controller4PW15196-1A3 I WANT TO DELETE ONE OR MOREPROGRAMMED ACTIONSMake sure you are not in program mode ( notblinking); if required, press to quit programmode.Browse to the programmed actions using thebutton, select the day you want to edit.Press the button for 5 seconds; program mode isenabled, the icon and selected action are blinking.Select the "last action" you want to keep using thebutton. All higher actions will be deleted.Confirm the deletion by pressing the button for 5seconds,ORconfirm the deletion for the current and the next daytoo by pressing the and buttonssimultaneously for 5 seconds.4 I WANT TO DELETE ALL PROGRAMMEDACTIONS AT ONCEQuit programming or browsing.Press the and buttons simultaneously for 5seconds; the icon will invert and disappear toconfirm deletion.7. MaintenanceThe remote controller does not need maintenance.Remove dirt with a soft damp cloth.8. TroubleshootingThe guidelines below might help to solve yourproblem. If you cannot remedy the problem, consultyour installer.No readings on the remote controller (displayblank)Check if the mains power is still applied to yourinstallation.Only is displayedThis indicates that the installation has just beenpowered, please wait until disappears.The schedule timer does work but theprogrammed actions are executed at the wrongtime (e.g. 1 hour too late or too early)Check if the clock and the day of the week are setcorrectly, correct if necessary (refer to "CLOCKSETTING FUNCTION" on page 4).I cannot enable the schedule timer (the iconblinks for 2 seconds and disappears)The schedule timer has not been programmed yet.First program the schedule timer (refer to"Programming the schedule timer" on page 10).I cannot enable the schedule timer (theicon is displayed)The schedule timer can not be enabled when acentralised control is connected.Limit operation cannot be selectedLimit operation is not available for cooling onlyinstallations.NOTE In the case above, if for example the lastaction was 3, the programmed actions 4and 5 will also be deleted (if they werepresent).NOTE Only use clear tapid water to moisten thecloth.