Installation manual BRC1E52A725 4PW71264-1 – 10.201114. Prohibit Function● Restriction of the number of operable functions.14-1 Press Menu/Enter button in the basicscreen.Main menu is displayed.As usual, "Lock function" is not shownin main menu.Press Menu/Enter button for 4 secondsto display the "Lock function".14-2 Select Lock function in the mainmenu, press Menu/Enter button.14-3 Select Function Prohibition in themenu, press Menu/Enter button.14-4 Select function by using (Left/Right)button and set by using (Up/Down)button.14-5 Press Menu/Enter button.Setting confirmation screen is displayed.14-6 Select Yes and press Menu/Enterbutton.Setting details are confirmed and basicscreen returns.If you want to restrict the number of operablefunctions on the remote controller to be definedas "sub", start with only connecting thiscontroller to the unit. Make sure that thiscontroller is set to "main" (factory set) first,change the restrictions to the setting youprefer and only then set the remote controllerto "sub".NOTE: When a function is prohibited, thewill be displayed next to the function inthe main menu screen.14-1Return SettingMain menu 1/2Quick StartPress Menu/Enter buttonfor 4 seconds.14-2Return SettingMain menuLock functionIndividual air flow directionQuick StartVentilationEnergy Saving OptionsSchedule1/2Press Menu/Enter button.14-3Return SettingLock functionProhibit ButtonFunction ProhibitionPress Menu/Enter button.14-414-5Return SettingProhibit functionsSchedule:Configuration: UNLOCKClock & Calendar: UNLOCKEnergy Saving List: LOCKSetpoint Range Set: UNLOCKSetback Condition: UNLOCKUNLOCKPress Menu/Enter button.14-6Return SettingSave the settings?Prohibit functionYes NoPress Menu/Enter button.