Daikin BRC7E618: BRC7E619 Operation Manual

Also see for BRC7E618: BRC7E619: Operation manual

Contents

Daikin BRC7E618: BRC7E619 Operation Manual Manual pdf 9 page image

English 5Refer to figure 1 on page [1]• Operating procedure varies with heatpump type and cooling only type. Contactyour Daikin dealer to confirm your systemtype.• To protect the unit, turn on the main powerswitch 6 hours before operation.• If the main power supply is turned off dur-ing operation, operation will restart auto-matically after the power turns back onagain.Operate in the following order.• AUTOMATIC OPERATION can beselected only by Heat pump split system orHeat recovery VRV system.• For cooling only type, “COOLING”, and“FAN” and “DRY”operation are able toselect.〈〈〈〈〈〈〈〈FOR SYSTEMS WITHOUT COOL/HEAT CHANGEOVER REMOTECONTROL SWITCH〉〉〉〉〉〉〉〉Refer to figure 1-1, 2 on page [1]OPERATION MODESELECTORPress OPERATION MODE SELECTORbutton several times and select theOPERATION MODE of your choice asfollows. COOLING OPERATION .................... “ ” HEATING OPERATION ..................... “ ” AUTOMATIC OPERATION ................ “ ”• In this operation mode, COOL/HEATchangeover is automatically conducted. FAN OPERATION .............................. “ ” DRY OPERATION ............................. “ ”5. OPERATION PROCEDURECOOLING, HEATING, AUTOMATIC,FAN, AND PROGRAM DRYOPERATION1 MODE• The function of this program is todecrease the humidity in your room withthe minimum temperature decrease.• Micro computer automaticallydetermines TEMPERATURE and FANSPEED.• This system does not go into operation ifthe room temperature is below 16°C.ON/OFFPress ON/OFF buttonOPERATION lamp lights up or goes off andthe system starts or stops OPERATION.NOTE• Do not turn OFF power immediately afterthe unit stops. Then, wait no less than5 minutes.Water is leaking or there is something elsewrong with the unit.〈〈〈〈〈〈〈〈FOR SYSTEMS WITH COOL/HEATCHANGEOVER REMOTE CONTROLSWITCH〉〉〉〉〉〉〉〉Refer to figure 1-1,3 on page [1]OPERATION MODESELECTOR(1) Select OPERATION MODE with theCOOL/HEAT CHANGEOVER REMOTECONTROL SWITCH as follows. COOLING OPERATION ............. “ ” HEATING OPERATION .............. “ ” FAN OPERATION....................... “ ” DRY OPERATION ...................... “ ”• See “FOR SYSTEM WITHOUT COOL/HEAT CHANGEOVER REMOTE CON-TROL SWITCH” for details on dry operation.2 ON OFF1