Daikin CTXM15N2V1B Operation Manual

Also see for CTXM15N2V1B: Installation manual Installer's reference guide

Contents

Daikin CTXM15N2V1B Operation Manual Manual pdf 6 page image

4 OperationOperation manual6CTXM15+FTXM20~71N2V1BDaikin room air conditioner3P485919-8K – 2018.092 To use fixed position, press when the louvers reach thedesired position.Result: disappears from the LCD. The louvers will stopmoving.INFORMATIONWhen the unit is installed in a corner of a room, thedirection of the louvers should be facing away from thewall. Efficiency will drop if a wall blocks the air.4.4.3 To use 3-D airflow direction1 Press and .Result: and appear on the LCD. The flaps (horizontalblades) and louvers (vertical blades) will begin to swing.2 To use fixed position, press and when the flapsand louvers reach the desired position.Result: and disappear from the LCD. The flaps andthe louvers will stop moving.4.5 Comfort airflow and Intelligent eyeoperationYou can use Comfort and Intelligent eye operation separately, orcombine them.4.5.1 Comfort airflow operationThis operation can be used in heating or cooling operation mode. Itwill provide a comfortable wind that will NOT come in direct contactwith people. The system automatically sets the fixed airflow positionupward in Cooling and downward in Heating operation mode.Cooling operation mode Heating operation modeINFORMATIONPowerful and Comfort airflow operation CANNOT be usedat the same time. The last selected function takes priority.If the vertical automatic swing is selected, Comfort airflowoperation will be cancelled.4.5.2 Intelligent eye operationThe system detects movement in the room and automatically adjuststhe airflow direction and temperature in order to avoid direct contactwith people. If no movement is detected for 20 minutes, the systemswitches to energy saving operation:NOTICE▪ Do NOT hit or push the Intelligent eye sensor. Doing somay lead to malfunction.▪ Do NOT place large objects near the Intelligent eyesensor.INFORMATIONPowerful or Night set operation CANNOT be used at thesame time with Intelligent eye operation. The last selectedfunction takes priority.▪ Detection sensitivity. Changes according to location, the numberof persons in the room, temperature range, etc.▪ Detection mistakes. The sensor may mistakenly detect pets,sunlight, moving curtains, etc.4.5.3 To start/stop Comfort and Intelligent eyeoperation1 Press one or more times.Result: The setting will change as follows:Display OperationComfort airflowIntelligent eye+ Comfort airflow and Intelligent eye— Both deactivatedNote: If there are people close to the front of the indoor unit or thereare too many people, use both operations at the same time.2 To stop operation, press until both symbols disappearfrom the LCD.4.6 Powerful operationThis operation quickly maximizes the cooling/heating effect in anyoperation mode. You can get the maximum capacity.INFORMATIONPowerful operation CANNOT be used together with Econo,Comfort airflow, Intelligent eye and Outdoor unit quietoperation. The last selected function takes priority.Powerful operation will NOT increase the capacity of theunit if it already operates at maximum capacity.4.6.1 To start/stop Powerful operation1 Press to start.Result: is displayed on the LCD. Powerful operation runsfor 20 minutes; after that, operation returns to the previously setmode.2 Press to stop.Result: disappears from the LCD.Note: Powerful operation can be set only when the unit is running. Ifyou press , operation will be cancelled; disappears from theLCD.4.7 Econo and Outdoor unit quietoperation4.7.1 Econo operationThis is a function which enables efficient operation by limiting themaximum power consumption value. This function is useful for casesin which attention should be paid to ensure a circuit breaker will nottrip when the product runs alongside other appliances.