4 OperationOperation manual8CTXM15+FTXM20~71N2V1BDaikin room air conditioner3P485919-8K – 2018.092 Press or to change the time setting.3 Press again.Result: and the set time are displayed on the LCD. The timerlamp lights up.INFORMATIONEach time or is pressed, the time settingadvances by 10 minutes. Holding the button down willchange the setting rapidly.4 To stop operation, press .Result: and disappear from the LCD and the timerlamp goes off. and the day of the week are displayed on theLCD.4.9.3 To combine OFF timer and ON timer1 To set the timers, refer to "4.9.1 To start/stop OFF timeroperation" on page 7 and "4.9.2 To start/stop ON timeroperation" on page 7.Result: and are displayed on the LCD.Example:Display Current time Set while… Operation6:00 the unit isoperating.Stops at 7:00and starts at14:00.the unit is NOToperating.Starts at 14:00.Note: If the timer setting is active, the current time is NOT displayedon the LCD.4.10 Weekly timer operationWith this operation, you can save up to 4 timer settings for each dayof the week.Example: Create a different setting from Monday to Friday and adifferent setting for weekends.Day of the week Setting exampleMonday▪ Make up to 4 settings.6:00 8:30 17:3025°C 27°C22:001 2 3 4ON OFF ON OFFTuesday~Friday▪ Use the copy mode if thesettings are the same asfor Monday.6:00 8:30 17:3025°C 27°C22:001 2 3 4ON OFF ON OFFSaturday▪ No timer setting—Sunday▪ Make up to 4 settings.8:00 10:00 19:00 21:0027°C 27°C25°CON OFF OFF ON1 2 3 4▪ ON-ON-ON-ON setting. Enables scheduling the operation modeand set temperature.▪ OFF-OFF-OFF-OFF setting.Only the turn off time can be set foreach day.Note: Be sure to aim the user interface at the indoor unit and checkfor a receiving tone when setting the Weekly timer operation.INFORMATIONThe clock MUST be set correctly before using any timerfunctions. Refer to "3.3 To set the clock" on page 4.INFORMATION▪ Weekly timer and ON/OFF timer operation CANNOT beused at the same time. The ON/OFF timer operationtakes priority. Weekly timer will be in standby,disappears from the LCD. When the ON/OFF timer iscompleted, the Weekly timer becomes active.▪ The day of the week, ON/OFF timer mode, time andtemperature (only for ON timer) can be set with theWeekly timer. Other settings are based on previous ONtimer setting.4.10.1 To set Weekly timer operation1 Press .Result: The day of the week and the reservation number of thecurrent day are displayed.2 Press or to select the day of the week and thereservation number.3 Press .Result: The day of the week is set. and blink.4 Press or to select the mode.Result: The setting will change as follows:Display FeatureON timerOFF timerBlank Deletes reservation5 Press .Result: The ON/OFF timer mode is set. and the timeblink.Note: Press to return to the previous screen. If blank isselected, continue to step 9.6 Press or to select the time. The time can be setbetween 0:00~23:50 in 10-minute intervals.7 Press .Result: The time is set and and the temperatureblink.Note: Press to return to the previous screen. If OFF timeris selected, continue to step 9.