Daikin CTXU25G2V1B Operation Manual

Also see for CTXU25G2V1B: Service manual Service manual Installation manual

Daikin CTXU25G2V1B Operation Manual Manual pdf 16 page image

14FRESH AIR SUPPLY VENTILATIONThis function takes in outdoor air to refresh indoor air. To start FRESH AIR SUPPLY VENTILATION1. Press “HUMIDIFY/VENTILATE” button, and select aFRESH AIR SUPPLY VENTILATION mode.• “ ” is displayed on the LCD. To cancel FRESH AIR SUPPLY VENTILATION2. Press “HUMIDIFY/VENTILATE” button, and select a OFF.• “ ” disappears from the LCD.NOTEMode Cyclic of humidity settings Multi-monitor lampHEATLit white for 2 seconds.After that, return tothe color of selectedoperation mode orchange to yellow in astandby state.AUTOCOOLDRYFAN Notes on FRESH AIR SUPPLY VENTILATIONAn example of FRESH AIR SUPPLY VENTILATION (page 26.)• Fresh air is taken from outdoor through the outdoor unit.• The outdoor noise and odor may be captured because the outdoor air is taken into the room. The operation noise is slightly louder.• When the outdoor temperature is higher than room temperature, the airflow rate of FRESH AIR SUPPLY VENTILATION will be low.1, 2 SelectFirst selected priorityInitial state of operationRoom BRoom ARoom BRoom ARoom BRoom A• The unit not in operation in Room B willgo into ventilation while the unit inRoom A is in COOL operation besidesventilation.The result is shown in the illustration onthe right.• The unit in first selected priorityoperation in Room A will takeprecedence, and the unit in Room B willgo into a standby state. (Yellow) In caseyou will start ventilation the unit inRoom B, the ventilation of Room Ahave to be stopped.The result is shown in the illustration onthe right.• After the ventilation of Room A isstopped, the unit in Room B will go intoventilation operation.COOL/SUPPLY VENTILATIONCOOL/SUPPLY VENTILATIONCOOL/SUPPLY VENTILATIONCOOL/SUPPLY VENTILATIONFAN/SUPPLY VENTILATIONFAN/SUPPLY VENTILATIONBLUEYELLOWBLUE BLUEWHITENot appearCOOLCOOL01_EN_3P232703-1.fm Page 14 Thursday, December 18, 2008 5:51 PM