19EnglishDeutschFrançaisNederlandsEspañolItalianoÅëëçíéêÜPortuguesÐóññêèéTürkçeTIMER OperationTimer functions are useful for automatically switching the air conditioner on or off at night or inthe morning. You can also use OFF TIMER and ON TIMER in combination. To use OFF TIMER operation• Check that the clock is correct.If not, set the clock to the present time. (page 7.)1. Press “OFF TIMER” button.• “ ” is displayed.• “ ” blinks.• “ ” and day of the week disappears from LCD.2. Press “SELECT” button until the time setting reaches thepoint you like.• Every pressing of either button increases or decreases the time setting by 10 minutes.Holding down either button changes the setting rapidly.3. Press “OFF TIMER” button again.• “ ” and setting time are displayed on the LCD.• The TIMER lamp lights up. To cancel the OFF TIMER operation4. Press “CANCEL” button.• “ ” and setting time disappears from LCD.• “ ” and day of the week are displayed on the LCD.• The TIMER lamp goes off.NOTE• When TIMER is set, the present time is not displayed.• Once you set ON, OFF TIMER, the time setting is kept in the memory. (The memory is canceled when remote controller batteries arereplaced.)• When operating the unit via the ON/OFF TIMER, the actual length of operation may vary from the time entered by the user. (Maximumapprox. 10 minutes) NIGHT SET MODEWhen the OFF TIMER is set, the air conditioner automatically adjusts the temperature setting (0.5°C up in COOL, 2.0°C down in HEAT) toprevent excessive cooling (heating) for your pleasant sleep.241, 301_EN_3P232703-1.fm Page 19 Thursday, December 18, 2008 5:51 PM