SiBE12-817 Main FunctionsFunction and Control 591.12 HOME LEAVE OperationOutline In order to respond to the customer's need for immediate heating and cooling of the room afterreturning home or for house care, a measure to switch the temperature and air volume from thatfor normal time over to outing time by one touch is provided. (This function responds also to theneed for keeping up with weak cooling or heating.)This time, we seek for simplicity of operation by providing the special temperature and airvolume control for outing to be set by the exclusive button.The SkyAir indoor models also have the function.Detail of theControl1. Start of FunctionThe function starts when the [HOME LEAVE] button is pressed in cooling mode or heatingmode (including stopping and powerful operation). If this button is pressed while the operation isstopped, the function becomes effective when the operation is started. If this button is pressedin powerful operation, the powerful operation is reset and this function becomes effective. The [HOME LEAVE] button is ineffective in dry mode and fan mode.2. Details of FunctionA mark representing [HOME LEAVE] is indicated on the liquid crystal display of the remotecontroller. The indoor unit is operated according to the set temperature and air volume forHOME LEAVE which were pre-set in the memory of the remote controller.The LED (Red) of indoor unit representing [HOME LEAVE] lights up. (It goes out when theoperation is stopped.)3. End of FunctionThe function ends when the [HOME LEAVE] button is pressed again during [HOME LEAVE]operation or when the powerful operation button is pressed.Others The set temperature and set air volume are memorized in the remote controller. When theremote controller is reset due to replacement of battery, it is necessary to set the temperatureand air volume again for [HOME LEAVE].
