• Split Sky Air • Indoor Units 5• Indoor Units • R-410A • FBQ-C7VEB3 Safety device settings4 OptionsSafety devices 35 50 60 71 100 125 140FBQPC Board Fuse 250V 3.15A 250V 3.15A 250V 3.15A 250V 3.15A 250V 3.15A 250V 3.15A 250V 3.15APC Board Fuse (Fan Driver) 250V 5A 250V 5A 250V 6.3A 250V 6.3A 250V 6.3A 250V 6.3A 250V 6.3AFan Motor Thermal Protector °C — — — — — — —Drain Pump Fuse °C 145 145 145 145 145 145 145FBQ35-140C3TW31279-3DOptionsOperation Control(*1): Electrical heater and humidifier are field supply. These parts should not be installed inside the equipment (refer to installation manual EKRP1B2A)(*2): If installing an electrical heater, an option PCB for external electrical heater (EKRP1B2) for each indoor unit is required.(*3): Mounting plate KRP4A96 is required for these options. Maximum 2 option PCB’s can be mounted.(*4): Decoration panel option EKBYBSD is required for direct mounting of the decoration panel on the unit.Contents of accessory bagItem FBQ35,50 FBQ60,71 FBQ100,125,140Panel related Decoration panel (*4) BYBS45D BYBS71D BYBS125DAir inlet and air discharge outlet related Air discharge adapter for round duct KDAJ25K56A KDAJ25K71A KDAJ25K140APanel related Decoration panel option EKBYBSDItem FBQ35,50 FBQ60,71 FBQ100,125,140Remote Control Wired Type BRC1D528 / BRC1E51AWireless Type HP BRC4C65CO BRC4C66Option BCB for external el. heater, humidifier and/or hour meter (*1), (*3) EKRP1B2AAdapter for wiring (interlock for fresh air intake fan) (*3) KRP1C64Wiring adapter for electrical appendices (*3) KRP4A51Remote sensor KRCS01-4BCentral remote control DCS302CA51Unified ON/OFF controller DCS301BA51Schedule timer DST301BA51Remote ON/OFF and FORCED OFF kit EKRORO3Mounting plate for adapter PCB KRP4A96Description QuantityFBQ35,50,60,71,100,125,140Hexagon tapping screw (M5x16) 16Round plain washer for wood 8Installation and operation manual 1Hose band 1Insulation for joint (GAS) 1Insulation for joint (LIQUID) 1Drain hose 1Drain hose sealing material 1Sealing material 2NOTES