• Split Sky Air • Indoor Units 7• Indoor Units • R-410A • FBQ-C7VEB5 Dimensional drawing & centre of gravity5 - 1 Dimensional drawingFBQ35C3TW31274-1A631 (suspension position)suspension bolt(Suspension position)500 or more(service space)(service space)75 or moreView A-A Detail BDetail BItem Name Description1 Liquid pipe connection Ø6.35 flare connection2 Gas pipe connection Ø9.52 flare connection3 Drain pipe connection VP25 (OD Ø32, ID Ø25)4 Remote control wiring connection -5 Power supply connection -6 Drain hole VP25 (OD Ø32, ID Ø25)7 Air filter -8 Air suction side -9 Air discharge side -10 Nameplate -NOTES1 Refer to ‘outlook drawing for installing optionalaccessories’ when installing optional accessories.2 The required ceiling depth varies according to theconfiguration of the specific system.3 For maintenance of the air filter, it is necessary toprovide a service access panel.Refer to the ‘filter installation method’ drawingFresh air intake position(Knock out hole)(On circumference)FBQ50C3TW31214-1ANOTE1 Refer to ‘outlook drawing for installing optionalaccessories’ when installing optional accessories.2 The required ceiling depth varies according to theconfiguration of the specific system.3 For maintenance of the air filter, it is necessary toprovide a service access panel.Refer to the ‘filter installation method’ drawing.View A-A Detail BSuspension bolt(Service space) Detail B 350 or more(Service space)(Suspension position)or moreNr Name Description1 Liquid pipe connection ø 6.35 flare (connection)2 Gas pipe connection ø 12.70 (flare connection)3 Drain pipe connection VP25 (O.D. ø 32 /I.D. ø 25)4 Remote control wiring connection5 Power supply connection6 Drain hole VP25 (OD ø 32 /I.D. ø 25)7 Air filter8 Air suction side9 Air discharge side10 Nameplate(Suspension position)Fresh air intake position(Knock out hole)(On circumference)