21Care Titanium apatite photocatalytic air-purifying filter1. Open the front panel andpull out the air filters. Page 202. Take off the titanium apatitephotocatalytic air-purifyingfilters.• Remove the fi lters from the tabs.3. Clean or replace thetitanium apatitephotocatalytic air-purifyingfilters.[Cleaning]3-1 Vacuum dust, and soak in lukewarmwater or water for about 10 to15 minutes if very dirty.3-2 After washing, shake off remainingwater and let them dry in the shade�• Do not wring out the fi lter to remove water from it.[Replacement]Remove the filter from the tabsand prepare a new one�• Dispose of the old fi lter as non-fl ammable waste.4. Insert the titanium apatitephotocatalytic air-purifyingfilters as they were.• When attaching the fi lter, check that the fi lter isproperly set in the tabs.5. Reattach the filters. Page 206. Close the front panel slowly�Page 20NOTE• Operation with dirty fi lters:− cannot deodorize the air,− cannot clean the air,− results in poor heating or cooling,− may cause odor.• Dispose of old fi lters as non-fl ammable waste.• To order a titanium apatite photocatalytic air-purifying fi lter, contactthe dealer where you bought the air conditioner.Item Titanium apatite photocatalyticair-purifying fi lter 1 setPart No� KAF970A46 (without frame)Care and CleaningFTX09NMVJU / FTX12NMVJU / FTXN09NMVJU / FTXN12NMVJU