8. Press or to select the desired temperature.Note: The set temperature for the weekly timer is displayed onlywhen setting the weekly timer mode.INFORMATIONThe temperature can be set between 18~30°C.9. Press .Result: Temperature and time are set in ON timer. Time isset in OFF timer. Timer lamp lights orange.Result: New reservation screen will appear.10. Repeat the previous procedure to set another reservationor press to complete the setting.11. Press to complete the setting.Result: is displayed on the LCD.Note: A reservation can be copied with same setting to another day.Refer to “4-6-2 To copy reservations” on page 13.4-6-2 To copy reservationsA reservation can be copied to another day. The completereservation of the selected day of the week will be copied.1. Press .2. Press or to select the day of the week to be copied.3. Press .Result: The reservation of the selected day of the weekwill be copied.4. Press or to select the destination day.5. Press .Result: The whole reservation is copied to the selected day andthe timer lamp lights orange.Note: To copy to another day, repeat the procedure.6. Press to complete the setting.Result: is displayed on the LCD.Note: To change the reservation setting after copying, refer to“4-6-1 To set Weekly timer operation” on page 12.4-6-3 To confirm reservationsYou can confirm if all reservations are set to your needs.1. Press .Result: The day of the week and the reservation numberof the current day are displayed.2. Press or to select the day of the week andreservation number to be confirmed and check thereservation details.Note: To change the reservation setting, refer to “4-6-1 To setWeekly timer operation” on page 12.3. Press to exit the confirmation mode.4-6-4 To deactivate and reactivate Weekly timer operation1. To deactivate the Weekly timer, press whileis displayed on the LCD.Result: disappears from the LCD and the timer lampgoes off.2. To reactivate the Weekly timer, press again.Result: The last set reservation mode will be used.4-6-5 To delete reservationsTo delete individual reservationsUse this function if you want to delete a single reservation setting.1. Press .Result: The day of the week and the reservation numberare displayed.2. Press or to select the day of the week to be deleted.3. Press .Result: , , and blink.4. Press or and select “blank”.Result: The setting will change as follows:5. Press .Result: The selected reservation is deleted.6. Press to exit.Result: Remaining reservations will be active.To delete a reservation for each day of the weekUse this function of you want to delete all reservation settingsfor one day of the week. This can be used in confirmation orsetting mode.1. Press or to select the day of the week to be deleted.2. Hold for about 5 seconds.Result: All reservations for the selected day will be deleted.13