2-2-1 Components: Remote controllerMenu (push 2sec)Panel (push 2sec)dagmhcbnl feijkpoa Signal transmitterb LCD displayc Temperature adjustment buttond ON/OFF buttone Vertical swing button and menu (push 2 seconds)f Horizontal swing buttong Comfort airfl ow and Intelligent eye operation buttonh Select buttoni Clock button and open panel (push 2 seconds)j Buttons for ON/OFF timer operationk Buttons for Weekly timer operationl Streamerm Econo and Outdoor unit quiet operation buttonn Mode buttono Powerful buttonp Fan buttonINFORMATIONUse (hold for 2 seconds) to open the front panel whenyou clean the air fi lters. See “6-4 To open the front panel” onpage 17.2-2-2 Status: Remote controller LCDIcon DescriptionOperation is activeOperation mode = AutomaticOperation mode = DryingOperation mode = HeatingOperation mode = CoolingOperation mode = Fan onlyPowerful operation is activeEcono operation is activeOutdoor unit quiet operation is activeThe indoor unit receives a signal from the remotecontrollerCurrent temperature settingAirfl ow rate = AutomaticAirfl ow rate = Indoor unit quietAirfl ow rate = HighAirfl ow rate = Medium highAirfl ow rate = MediumAirfl ow rate = Medium lowAirfl ow rate = LowComfort operation is activeIntelligent eye is activeAutomatic vertical swing is activeAutomatic horizontal swing is activeStreamer is activeIcon DescriptionON timer is activeOFF timer is activeWeekly timer is activeDay of the weekCurrent time2-2-3 To operate the remote controllera ≥500(mm)a Signal receiverNote: Make sure that there are no obstacles within 500 mmunder the signal receiver. They may infl uence receptionperformance of the remote controller.4