SiBE06-514A Main FunctionsFunction and Control 211.3 Air Flow SelectionWhen setting theair flow selectionswitch to . Air conditioner automatically decides the appropriate blowing pattern depending on theoperating mode / situation. During Dry mode, so that cold air does not come into direct contact with people, air is blownupper air outlet.When setting theair outletselection switchto . Regardless of the operating mode or situation, air blows from the upper air outlet. Use this switch when you do not want air coming out of the lower air outlet. (While sleepingetc..)Operating mode Situation Blowing patternCool mode When the room has becomefully cool, or when one hour haspassed since turning on the airconditioner. So that air does not come into direct contactwith people, air is blown upper air outlet,room temperature is equalised. At start of operation or othertimes when the room is not fullycooled. Air is blownfrom the upperand lower airoutlets for highspeed coolingduring Coolmode, and forfilling the roomwith warm airduring Heatmode.Heat mode At times other than below.(Normal time.) At start or when air temperatureis low. So that air does not come into direct contactwith people. Air is blown upper air outlet.
