Daikin FVXG25K2V1B Operation Manual

Also see for FVXG25K2V1B: Service manual Service manual Service manual Service manual Technical data

Daikin FVXG25K2V1B Operation Manual Manual pdf 13 page image

12EnglishRADIANT OperationThe RADIANT operation provides a comfortable environment with quiet andcurrentless heating operation in addition to the HEAT operation mode. TheRADIANT operation has 2 operation modes.To start RADIANT operationPress1. and select an HEAT operation.Each pressing of the button advances the mode setting in sequence.•AUTO DRY COOL HEAT FAN“• ” is displayed on the LCD.Press2. and select a RADIANT operation.“• ” is displayed on the LCD.The RADIANT lamp lights red.•This button can be used only in the HEAT operation mode.•When the RADIANT operation starts, the temperature of the radiant panel increases.•HEAT RADIANT1 RADIANT2DisplayRADIANT operation with HEATAuto fan speedRADIANT operationGentle breezeRADIANT1Use this operation when the difference•between the set temperature and indoortemperature is large, or to warm up the roomquickly.RADIANT2Use this operation to prioritize quiet and•currentless heating operation, or when thenoise from RADIANT1 operation bothers you.The gentle breeze operation starts from thebeginning.CAUTIONDuring the RADIANT operation, the surface temperature of the panel will be about 55°C at maximum.•Even after the RADIANT operation is fi nished, the surface temperature of the panel of the air conditioner stays hot for a while. Do not touch theair conditioner until the surface temperature of the panel decreases.Be careful that children do not touch the surface of the panel.NOTENotes on RADIANT operationIf RADIANT2 operation does not warm up the room, use HEAT or RADIANT1 operation.•RADIANT1 can be used with POWERFUL operation. RADIANT2 cannot be used with the POWERFUL operation.•This operation may not warm up the room adequately depending on conditions such as an extremely low outside temperature and lack of•adequate performance.The RADIANT operation uses the auto fan speed, so the airfl ow rate cannot be changed.•When the indoor units are connected using a multi system, please refer to “Selecting the operation mode” in note for multi system.• Page 27►