18EnglishECONO OperationECONO operation is a function which enables effi cient operation by limiting themaximum power consumption value.This function is useful for cases in which attention should be paid to ensure acircuit breaker will not trip when the product runs alongside other appliances.To start ECONO operationPress during operation.“• ” is displayed on the LCD.To cancel ECONO operationPress again.“• ” disappears from the LCD.[Example]Normal operation ECONO operationIn case the air conditioner and other appli-•ances which require high power consumptionare used at same time, a circuit breaker maytrip if the air conditioner operate with its maxi-mum capacity.The maximum power consumption of the air•conditioner is limited by using ECONO opera-tion.The circuit breaker will hardly trip even if theair conditioner and other appliances are usedat same time.TimeMaximum duringnormal operationMaximum duringECONO operationNormaloperationECONOoperationFrom start up until set temperature is reachedRunning current andpower consumptionThis diagram is a representation for illustrative•purposes only.The maximum running current and powerconsumption of the air conditioner in ECONOoperation vary with the connecting outdoorunit.NOTENotes on ECONO operationECONO operation can only be set when the unit is running. Pressing• causes the settings to be canceled, and the “ ” disappearsfrom the LCD.ECONO operation is a function which enables effi cient operation by limiting the power consumption of the outdoor unit (operating frequency).•ECONO operation functions in AUTO, COOL, DRY, and HEAT operation.•This is not available in RADIANT and FAN operation.POWERFUL operation and ECONO operation cannot be used at the same time.•Priority is given to the function of whichever button is pressed last.If the level of power consumption is already low, ECONO operation will not drop the power consumption.•