• Indoor Units • ROUNDFLOW CASSETTE • FXFQ-P7VEB• VRV Systems ® • Indoor Units145 Dimensional drawing & centre of gravity5 - 1 Dimensional drawingFXFQ80,100P3D057034Nr Name Description1 Indoor unit2 Decoration panel3 Suction chamber4 Connecting chamber (Right)5 Connecting chamber (Left)Service acces panel:450x450 mm or moreNOTES1 When installing this kit, inspection hatch is necessary.(It is necessary when servicing.) Either one ofinspection hatchs must be installed.2 Field construction.3 The corner air outlet of this part must be shut.4 In case of mounting a duct fan, make sure touse a wiring adapter for electrical appendicesand link with the indoor unit fan.5 The intake air flow rate is recommended to be 20%or less of the H speed air flow rate.If the intake air flow rate is too large, the operatingsound may rise or detection of the indoor unit suctiontemperature may be affected.6 It indicates the distance between the T-tube inlet and theindoor unit inlet when the T-tube is connected.(Refer to note: 1)Service acces panel:450 x 450 mm or more(Refer to note: 1)Installation service access panelPipe connection sideDrain connection sideNote: 3Note: 3InletT-tubeField supplyAir flow rate (m3/min)Ventilation resistance in chamber (Note: 6)Static pressure of chamber (Pa)Connecting chamber mounting space455 (Ceiling opening space)FXFQ125P3D057032Nr Name Description1 Indoor unit2 Decoration panel3 Suction chamber4 Connecting chamber (Right)5 Connecting chamber (Left)Service acces panel:450x450 mm or moreNOTES1 When installing this kit, inspection hatch is necessary.(It is necessary when servicing.) Either one ofinspection hatchs must be installed.2 Field construction.3 The corner air outlet of this part must be shut.4 In case of mounting a duct fan, make sure touse a wiring adapter for electrical appendicesand link with the indoor unit fan.5 The intake air flow rate is recommended to be 20%or less of the H speed air flow rate.If the intake air flow rate is too large, the operatingsound may rise or detection of the indoor unit suctiontemperature may be affected.6 It indicates the distance between the T-tube inlet and theindoor unit inlet when the T-tube is connected.(Refer to note: 1)Service acces panel:450 x 450 mm or more(Refer to note: 1)Installation service access panelPipe connection sideDrain connection sideNote: 3Note: 3InletT-tubeField supplyAir flow rate (m3/min)Ventilation resistance in chamber (Note: 6)Static pressure of chamber (Pa)Connecting chamber mounting space455 (Ceiling opening space)348