• Indoor Units • Ceiling Suspended Unit • FXHQ-MAVE• VRV ® Systems • Indoor Units41 Specifications111-2 ELECTRICAL SPECIFICATIONS (50HZ) FXHQ32MAVE FXHQ63MAVE FXHQ100MAVEPower Supply Name VEPhase 1~Frequency Hz 50Voltage V 220-240Current Minimum circuit amps (MCA) A 0.8 0.8 0.9Maximum fuse amps (MFA) A 15 15 15Full load amps (FLA) A 0.6 0.6 0.7Voltage range Minimum V -10%Maximum V +10%Notes Voltage range : units are suitable for use on electrical systems where voltage supplied to unit terminalsis not below or above listed range limits.Maximum allowable voltage range variation between phases is 2%.MCA/MFA : MCA = 1.25 x FLAMFA is smaller than or equal to 4 x FLANext lower standard fuse rating minimum 15ASelect wire size based on the MCAInstead of a fuse, use a circuit breaker1-3 ELECTRICAL SPECIFICATIONS (60HZ) FXHQ32MAVE FXHQ63MAVE FXHQ100MAVEPower Supply Name VEPhase 1~Frequency Hz 60Voltage V 220Current Minimum circuit amps (MCA) A 0.9 0.9 1.3Maximum fuse amps (MFA) A 15 15 15Full load amps (FLA) A 0.7 0.7 1.0Voltage range Minimum V -10%Maximum V +10%Notes Voltage range : units are suitable for use on electrical systems where voltage supplied to unit terminalsis not below or above listed range limits.Maximum allowable voltage range variation between phases is 2%.MCA/MFA : MCA = 1.25 x FLAMFA is smaller than or equal to 4 x FLANext lower standard fuse rating minimum 15ASelect wire size based on the MCAInstead of a fuse, use a circuit breaker