Procedure to Remove Panels and Fan Motor Si2413202 Removal Procedure1. Procedure to Remove Panels and Fan MotorProcedure Warning Be sure to wait for 10 minutes or more after turning off all powersupplies before disassembling work.Step Procedure Points1. Features Take care not to cut yourfinger by the fins of the heatexchanger. The stop valve cover isunited with the shelter. When reassembling, makesure to fit the 5 hooks.1 Loosen the screw of thestop valve cover.Pull down the stopvalve cover and removeit.DAIKINDAIKINHandleOutdoor airthermistorStopvalvecoverShelterHooks

outdoor unit

Procedure to Remove Panels and Fan Motor

Procedure to Remove El. Compo. Box

Procedure to Remove Sound Blanket

Procedure to Remove Compressor

Daikin R13NUV2S Service Manual

List of Applicable Models

Overview

Equipment does not Operate

Cooling / Heating Operation Starts but Stops Immediately

After Unit Shuts Down, It cannot be Restarted for a While

Equipment Operates but does not Provide Cooling

Equipment Operates but does not Provide Heating

Equipment Discharges White Mist

Equipment Produces Loud Noise or Vibration

Equipment Discharges Dust

Troubleshooting by Remote Controller

wired remote controller

wireless remote controller

Error Codes and Description

Detailed Error Codes

Abnormality

temperature control

Shortage or Electronic Expansion Valve Failure

Remote Controller

Check

indoor and outdoor units

centralized controller

outdoor units

and outdoor units

R13NUV2S