Daikin R410A Series Installation Manual

Also see for ATX20K2V1B: Service manual Operation manual Installation manual Installation manual

Contents

Daikin R410A Series Installation Manual Manual pdf 10 page image

3 EnglishChoosing an Installation SiteBefore choosing the installation site, obtain user approval.1. Indoor unit• The indoor unit should be sited in a place where:1) the restrictions on installation specified in the indoor unit installation drawings are met,2) both air inlet and air outlet have clear paths met,3) the unit is not in the path of direct sunlight,4) the unit is away from the source of heat or steam,5) there is no source of machine oil vapour (this may shorten indoor unit life),6) cool (warm) air is circulated throughout the room,7) the unit is away from electronic ignition type fluorescent lamps (inverter or rapid start type) as they may shorten the remotecontroller range,8) the unit is at least 1m away from any television or radio set (unit may cause interference with the picture or sound),9) install at the recommended height (1.8m),10) no laundry equipment is located.11) the appliance shall be stored so as to prevent mechanical damage from occurring.2. Wireless remote controller• Turn on all the fluorescent lamps in the room, if any, and find the site where remote controller signals are properly receivedby the indoor unit (within 7m).